Full Plastic Bag Filter Housing | High Precision 0.5–200µm

Share to:

WF Series Bag Filter

Full plastic bag filter is a new filter system, with high precision, big flow, easy installation and Maintenance. It consists of the housing, filter basket and filter bag.

Features

- UVPC plastic filter housing with strong corrosion resistance

- Unique seal design makes the filter more safety and reliable

- The special filtration technology can effectively prevent the bag plunged into the support basket, no inner leak

- Compact structure, beautiful appearance and small footprint

- High filter precision, the filtration range is 0.5 to 200um

- Large processing flow rate, large capacity and high efficiency

Detail

Working principle

The water to be filtered flows in from the inlet, and then flows from the inside to outside of the filter bag, finally flows into the specified container through the outlet at the bottom of the filter. The filtered particle impurities are trapped in the filter bag, to make sure that there is no contamination to the filtered water when replacing the filter bag and the unit can be re-used after replacing the filter bag.

Resource

Specification
Manual

Model	Size	Bag size	Water inlet/outlet size	Height of water inlet	Max. working pressur
WL-WF-11A	φ225-H805	φ7“(178mm)-H17”(419mm)	Flange:DN50/ANSI2”	650	A=0.4MPA
WL-WF-12A	φ225-H1190	φ7“(178mm)-H32”(813mm)	Flange:DN50/ANSI2”	1035	A=0.4MPA
WL-WF-11B	φ225-H820	φ7“(178mm)-H17“(419mm)	Flange:DN50/ANSI2”	665	B=0.7MPA
WL-WF-12B	φ225-H1200	φ7“(178mm)-H32"(813mm)	Flange:DN50/ANSI2”	1045	B=0.7MPA

Pool Filters.pdf