HF Series Horizontal Sand Filter

Horizontal Sand Filter

Horizontal sand filters are made of polyester reinforced with fiberglass; they are totally anti-corrosive and have high mechanical , chemical and thermal resistance, higher quality water is achieved with their greater filtering capacity. Indexes of turbidity and contaminants of the filtered water are reduced due to their increased retention capacity, the time between back washed increases proportionally with the height of the filter bed, meaning there are fewer interruptions in filtration, and lower water consumption, because the number of back washes needed is decreased and there is less erosion of the filtering material.

A horizontal filter is the ideal choice in cases where a great volume of water is to be treated, and in cases which require optimization of the available space, as a single horizontal filter can be suitable up to 3 vertical filters of the same diameter simplied by increasing its length.

φ1200mm

φ1400mm

φ1600mm

φ1800mm

φ2000mm

Standard:
Maximum working pressure:36psi/2.5kg/m²
Maximum operating water temperature:50ºC   
Maximum testing pressure:58psi/4.0kg/cm²
Optional:
Maximum working pressure:58psi/4.0kg/m²
Maximum operating water temperature:50ºC   
Maximum testing pressure:86psi/6.0kg/cm²